MPE tubes
Multi-port extrusions (MPE) are used mainly for heat exchangers in cooling and air-conditioning systems. Their favorable inside-to-outside area ratio makes multi-port extrusions ideal for heat exchangers with high performance requirements.
We produce both micro and macro MPE tubes for heat exchangers in the following dimensions:
Dimensions Micro MPE
Height: 1.8 –3 mm
Width: 12 –30 mm
| Alloys |
Temper (EN 515)/ EN 754-2 |
Elongation |
| 1050 |
F,H112 |
Min 25 |
| 1070 |
F,H112 |
Min 25 |
1100
|
F,H112 |
Not specified, specification according to agreement |
| 1197 |
F,H112 |
Not specified, specification according to agreement |
| 3003 |
F,H112 |
Min 25 |
| 3102 |
F,H112 |
Min 25 |
For the MPEs, the mechanical properties depend on whether these are delivered in coil (F) or straightened and shortened lengths (H112).
Dimensions Macro MPE
Height: 2 –8
Width: 80 –121 mm
| Alloys |
Temper (EN 515)/ EN 754-2 |
Elongation |
| 1050 |
F,H112 |
Min 25 |
| 1070 |
F,H112 |
Min 25 |
| 1100 |
F,H112 |
Not specified, specification according to agreement |
| 1197 |
F,H112 |
Not specified, specification according to agreement |
| 3003 |
F,H112 |
Min 25 |
| 3102 |
F,H112 |
Min 25 |
For the MPEs, the mechanical properties depend on whether these are delivered in coil (F) or straightened and shortened lengths (H112).
