How is aluminum made?
Get the highlights on aluminum's journey from bauxite, through production, use and recycling.
aluminum production starts with the raw material bauxite, a clay like soil type found in a belt around the equator. The bauxite is mined from a few meters below the ground.
The bauxite is then transported to plants where the clay is washed off and the bauxite passes through a grinder.
Alumina, or aluminum oxide, is extracted from the bauxite through refining.
Alumina is separated from the bauxite by using a hot solution of caustic soda and lime.
The mixture is heated and filtered, and the remaining alumina is dried to a white powder.
Next stop is the metal plant. Here, the refined alumina is transformed into aluminum.
Three different raw materials are needed to make aluminum, aluminum oxide, electricity and carbon.
Electricity is run between a negative cathode and a positive anode, both made of carbon. The anode reacts with the oxygen in the alumina and forms CO2.
The result is liquid aluminum, which can now be tapped from the cells.
The liquid aluminum is cast into extrusion ingots, sheet ingots or foundry alloys, all depending on what it will be used for.
The aluminum is transformed into different products.
In the extrusion process, the aluminum ingot is heated and pressed through a shaped tool called a die.
The extrusion technique has almost unlimited possibilities for design and offers countless application opportunities.
Sheet ingots are used to make rolled products, such as plates, strip and foil.
aluminum is very ductile. Foil can be rolled from 60 cm to 2-6 mm, and final foil product can be as thin as 0.006 mm. It still will not let light, aroma or taste in or out.
Primary foundry alloys
aluminum foundry alloys are cast in different shapes. The metal will be remelted again and made into, for example, wheel rims or other car parts.
The content in foundry alloys can be customized to fit their further use.
Recycling scrap aluminum requires only 5 percent of the energy used to make new aluminum.
aluminum can be recycled over and over again with 100 percent efficiency. In other words, none of aluminums natural qualities are lost in the recycling process.
The recycled product may be the same as the original product, or it can become something completely different. Aircraft, automobiles, bicycles, boats, computers, household appliances, wire and cans are all sources for recycling.